Reyee RG E5 Wi-Fi 6 Router: A Complete Troubleshooting Guide

Reyee RG E5 Wi-Fi 6 Router Setup Instructions

The Reyee RG E5 Wi-Fi 6 router is one of the best Mesh routers. It offers an unmatched wireless experience with Wi-Fi 6. It has a dual-band signal along with a 5G transmitting rate of 2400Mbps. Its 2.4G band has a transmitting rate of 800Mbps. This lessens the buffering as well as latency and enables effortless streaming.

To get the best out of your Reyee, you need to accurately proceed with the Reyee RG E5 Wi-Fi 6 router setup. On this page, we will explain the whole process to set up the Reyee router.

Reyee RG E5 Wi-Fi Router Login

To configure the router and accurately set it up, you need to access its admin panel. After accessing the control panel, you can configure it however you want to. You can log into the router through a web browser or via the Reyee app.

The Reyee RG E5 Wi-Fi router login steps are as follows:

• First, you need to install the Reyee router app.
• Next, you can scan the barcode on the router.
• Then, click on ‘Add Router’ and follow the given instructions.
• Now, you can set the name and password of your router’s network.

This is the procedure for the Reyee RG E5 Wi-Fi router login.

Reyee RG E5 Wi-Fi Router Login via IP Address

You can proceed with the Reyee RG E5 Wi-Fi router login via IP address as well. When you don’t have access to the Reyee app or there’s an issue. You can log in through the web browser. The instruction for this method are mentioned below:

• Firstly, connect your device to the router’s network.
• Then, the setup page should automatically appear.
• If not, then you can open a web browser and enter the IP address of the router.
• Now, you can configure the router accordingly.

This is the procedure for the Reyee RG E5 Wi-Fi router login via IP address

Reyee RG E5 Wi-Fi Router not Connecting to Internet

Various reasons could be liable for the Reyee RG E5 Wi-Fi router not connecting to the internet. It doesn’t mean that your router is damaged. There could be an issue from your end as well.

Whatever the issue might be, you can easily fix it. The troubleshooting tips are as follows:

• Check if the location of the router allows it to deliver a signal to every room.
• Contact your ISP if you are experiencing a slow internet connection.
• Try changing the channel of your router, as the current one can be overcrowded.
• Disconnecting and then reconnecting your device.
• You can try powering off your router and then turning it back on.
• Establish a connection using an ethernet cable.
• Update your router’s firmware and eliminate all the issues.
• If none of these are working, then you need to reset the router.

These are some ways you can fix the Reyee RG E5 Wi-Fi router not connecting to internet.

Reyee RG E5 Firmware Update

Executing the Reyee RG E5 firmware update is very easy. You can do so with a single click. When you are experiencing issues with your router, you need to upgrade its firmware. By doing so, all the glitches will be eliminated. The procedure for this is mentioned below:

• First, you need to log into the router’s login page. You can use the app only.
• Next, in ‘Settings’ and then go to ‘Update’.
• Then, you can see if the latest version is available or not.
• If the router has a new version, you just need to click on the device you want to update.

This is how you can proceed with the Reyee RG E5 firmware update.

Reyee RG E5 Router to Factory Default Settings

When your router doesn’t work effectively and you have tried every troubleshooting method. You need to reset Reyee RG E5 router to resolve the issue. You can also reset Reyee RG E5 router to factory settings when you have forgotten the login password. The steps for the reset are as follows:

• Firstly, power on the router and give it some time to properly start up.
• Secondly, locate the reset button. You can find it on the back of the router.
• Thirdly, press the reset button.
• Fourthly, release the button when the status LED light blinks.

When the light stabilizes, the reset Reyee RG E5 router to factory settings is successful. Now, you have to reconfigure the router as the default settings are restored.

Reyee RG E5 Wi-Fi 6 Parental Controls

The Reyee router also offers a parental control feature. This way you can block any device from accessing the internet. You can even set up a blocking period for parental controls. The procedure for enabling the Reyee RG E5 Wi-Fi 6 router parental controls is easy. The steps are as follows:

• First, open the Reyee app where you are logged in.
• Next, on the homepage, go to the ‘Scenario’ section.
• Then, click on ‘Parental Control’.
• Afterward, choose the client you want to block.
• Now, you can set a blocking period for limiting the internet access of the client.
• Also, you can tap on ‘Block Now’ to instantly block the client.
• If you want to give access to the client for a day then you need to click on ‘Allow Today’.

This is how you can enable the Reyee RG E5 Wi-Fi 6 router parental controls. Ensure the device you want to block is connected to the router.

FAQs